Agent Skills
› zjunlp/SkillNet
› scienceworld-circuit-connector
scienceworld-circuit-connector
GitHub用于在仿真环境中连接两个电气组件的终端以构建或修改电路。适用于测试导电性或激活设备，通过指定组件和端点建立连接并验证电路状态。
触发场景
需要连接电池、导线、开关等组件以构建电路
测试材料导电性或激活负载设备
安装
npx skills add zjunlp/SkillNet --skill scienceworld-circuit-connector -g -y
SKILL.md
Frontmatter
{
"name": "scienceworld-circuit-connector",
"description": "This skill connects two electrical components (e.g., wires, batteries, devices) by their terminals to build or modify a circuit. Use when constructing electrical setups for testing, such as conductivity checks or device activation. The input includes two component identifiers and their connection points, and the output is an established electrical connection."
}
Instructions
Primary Action
Execute the connect OBJ to OBJ action. The syntax is connect <ComponentA> <TerminalA> to <ComponentB> <TerminalB>.
When to Use
Use this skill when you need to establish an electrical connection between two components as part of building a circuit for testing or device operation. Common scenarios include:
- Building a circuit to test a material's conductivity.
- Connecting a power source (battery) to a load (light bulb, buzzer).
- Integrating a switch or sensor into a circuit.
Procedure
- Identify Components: Locate the two components you need to connect (e.g.,
battery,black wire,unknown substance M,electric buzzer). - Identify Terminals: Examine the components if necessary to determine their available connection points (e.g.,
anode,cathode,terminal 1,terminal 2). - Formulate Command: Construct the
connectcommand using the pattern:connect <ComponentA> <TerminalA> to <ComponentB> <TerminalB>.- Example from trajectory:
connect battery anode to black wire terminal 1
- Example from trajectory:
- Execute: Issue the command. A successful observation will confirm the connection (e.g., "
anode on battery is now connected to terminal 1 on black wire").
Key Principles
- Circuit Logic: Ensure your connections follow basic electrical principles. A typical series circuit path might be: Battery (+) -> Wire -> Device -> Wire -> Battery (-).
- Verification: After making connections, check the state of indicators (like lights or buzzers) or use the
examineaction on components to verify the circuit is complete and functional. - Error Handling: If a connection fails, verify the component and terminal names are correct. Some terminals may only accept one connection.
Related Skills
- For disconnecting components, use the
disconnect OBJaction. - To activate/deactivate a powered component in the circuit, use the
activate OBJ/deactivate OBJactions. - Refer to
references/circuit_basics.mdfor common circuit diagrams and troubleshooting.
版本历史
- 7bb9a48 当前 2026-07-25 11:52
