logs-stop

Stop the active capture(s) started by logs-start and summarize the result. Never ask the user which tier is running - detect it.

Step 1: detect

logs-start writes a marker per live tier naming the process that streams: logs/.sim-capture.pid and logs/.device-capture.pid. Read those - do not go looking for processes.

for tier in sim device; do
  PIDFILE="logs/.${tier}-capture.pid"
  [ -f "$PIDFILE" ] || continue
  PID=$(cat "$PIDFILE" 2>/dev/null)
  if [ -n "$PID" ] && kill -0 "$PID" 2>/dev/null; then
    echo "$tier ACTIVE (pid $PID)"
  else
    echo "$tier marker stale (pid ${PID:-none} gone), removing"
    rm -f "$PIDFILE"
  fi
done
[ -f llmtemp/.device-log-start-time ] && echo "structured PENDING: $(cat llmtemp/.device-log-start-time)"

structured has no process - a marker file is the only evidence. If nothing is found, say so plainly and stop; do not summarize a stale file as if it were fresh.

Never detect or stop a capture by process pattern

The obvious-looking check is wrong and it is destructive:

pgrep -f "simctl spawn.*log stream"     # matches ANY simulator log stream on the machine

That pattern is not specific to this repo, this app, or this capture. It matches an unrelated log stream any other session has running, reports sim ACTIVE when no VivaDicta capture exists, and the matching pkill then kills that session's stream. A capture the user never started must never be stopped, so the marker is the only handle.

Two related traps, if you ever debug this by hand:

• pgrep -a is not a macOS flag. pgrep here accepts only [-Lfilnoqvx], yet -a exits 0 and prints a bogus pid rather than erroring. Use plain -f.
• grep for a pattern matches your own pipeline. ps -A | grep "log stream" counts the greps themselves, because both carry the string in their own argv. Add | grep -v grep, or check the marker instead.

Step 2: stop and summarize each active tier

Kill the streaming process the marker names. Do not kill the wrapper script: launch_*.sh is the parent of the stream, and killing the parent reparents the stream to PID 1, where it keeps appending to the log file with nothing left to stop it. Killing the stream is enough - the script's tee then reaches EOF and the script exits, clearing its own marker.

sim

PID=$(cat logs/.sim-capture.pid)
ps -p "$PID" -o command= | grep -q "log stream" || echo "refusing: pid $PID is not a log stream"
kill "$PID"
LOGFILE=$(ls -t logs/sim-*.log 2>/dev/null | head -1)

device

PID=$(cat logs/.device-capture.pid)
ps -p "$PID" -o command= | grep -q "devicectl device process launch" || echo "refusing: pid $PID is not a device capture"
kill "$PID"
LOGFILE=$(ls -t logs/device-*.log 2>/dev/null | head -1)

The ps check is there because a pid can be reused. If the command line does not match, say so and stop rather than killing an unrelated process.

The capture ends with App terminated due to signal 15 - that is this skill's kill, not a crash. Say so rather than reporting it as a failure.

structured

Check staleness first. If llmtemp/.device-log-start-time is more than a few hours old, show its timestamp and ask before collecting - the marker may be left over from an abandoned session, and collecting is expensive.

The script needs interactive sudo, so the user must run it themselves. Root is a hard requirement inside /usr/bin/log, not a choice this script makes - verified 2026-09-05, running it unprivileged fails outright and writes nothing:

$ /usr/bin/log collect --device-udid <udid> --start <time> --output out.logarchive
log: Must be root to collect logs from attached device

There is no flag or output-path that avoids it, so do not try to drop the sudo. (Local-only log collect, with no --device-udid, is the case that can run unprivileged - the device path talks to attached hardware.)

Note also that log is a shell builtin in Anton's zsh, so a bare log show ... typed interactively fails with too many arguments. Use /usr/bin/log. The script is unaffected: it runs under #!/bin/bash.

Hand them a line they can paste, not a description of one. In Claude Code, a prompt starting with ! runs in the session and its output lands back in the conversation, so the whole handoff is one copy-paste. Print exactly this, on its own line, as the last thing before you stop:

! ./scripts/collect_device_logs.sh

Do not write it as a bare ./scripts/collect_device_logs.sh and explain that sudo is needed - that reads as "go and do this in a terminal somewhere", and the result then has to be pasted back by hand. The ! prefix is the part that makes it work in place, and it is not obvious unless it is shown.

Then wait for confirmation and read the newest export:

LOGFILE=$(ls -t logs/device_*.txt 2>/dev/null | head -1)

It also writes logs/vivadicta_device_*.logarchive, reopenable in Console.app. Do not claim the logs exist before the user confirms the script finished. Remove the marker files once collection succeeds so the next logs-stop does not re-trigger it.

Step 3: report

Per file: path, size, modified time, line count, and level counts.

wc -l "$LOGFILE"
grep -oE '\[(INFO|DEBUG|ERROR|WARNING|NOTICE)\]' "$LOGFILE" | sort | uniq -c | sort -rn

Then apply $ARGUMENTS:

Read levels skeptically

Several call sites log success messages at [ERROR] - for example AudioPrewarmManager.swift:490 ("Input tap installed") and the AppGroupCoordinator state-update lines, where all 30 "errors" in one capture were routine status changes. Report what a line says, not what its level claims. A raw error count is misleading on its own.

Notes

• Logs are never deleted here; this only stops streams and summarizes.
• logs/ is gitignored.

Related

• logs-start