Start a local Temps server

Boots the temps binary from source (cargo run --bin temps --package temps-cli -- serve ...) for quick local iteration, no debugger required. See CONTRIBUTING.md for the one-shot manual version of this; this skill adds port isolation across worktrees and a repeatable restart flow.

Prerequisites

• The database container from CONTRIBUTING.md ("Database" section) running and reachable, e.g.:

  docker run -d --name temps-db --restart unless-stopped \
    -p 127.0.0.1:5432:5432 \
    -v temps-db-data:/home/postgres/pgdata/data \
    -e POSTGRES_USER=temps -e POSTGRES_PASSWORD=temps -e POSTGRES_DB=temps \
    timescale/timescaledb-ha:pg18
  

  If your container has a different name, user, password, or port, set TEMPS_DEV_DB_CONTAINER / TEMPS_DEV_DB_URL_BASE before running step 0, or just edit the generated slot env file afterwards.

• bun install already run in <checkout>/web.

• Docker running, if you'll exercise features that shell out to it (container deploys, agent sandboxes, etc.) — see the Docker precheck below.

Port slots — read this first

If you keep multiple worktrees of this repo around (one per branch/PR), the naive approach — hardcode :8080 / :3000 and kill whatever's listening — means starting temps in worktree B kills the server another session was using in worktree A. This skill instead assigns each checkout a slot (0–29) and derives every port from it:

Rules:

• All listeners bind to 127.0.0.1 by default. LAN exposure is not part of this workflow; configure TLS and strong non-development credentials before opting into a non-loopback bind.
• The first checkout you run step 0 in claims slot 0, so the familiar http://localhost:3000 / :8080 belong to whichever worktree you started first (usually your primary clone).
• Every other checkout gets the lowest free slot ≥ 1, and keeps it — the claim is recorded atomically in ~/.temps-dev/slot-<N>.claim/ with its mode-0600 state in slot-<N>.env, so restarting temps in the same worktree always lands on the same ports. Existing claims remain reserved until explicitly released with step 7, even while their server is stopped.
• The kill step verifies the listening process's cwd is inside this checkout before killing it. If it isn't, stop and report rather than killing it — that process belongs to another session.
• The ranges never overlap (HTTP 8080–8370, parked 8085–8375, TLS 8443–8733, web 3000–3029). If you run other local services in the 8080–8730 or 3000–3029 range, expect port contention and free a slot (step 7) or shift the base ports in this skill.

Modes

• Default (monolith) — one temps serve process (--role=all, the single-binary control plane). This is what you get with a bare /start-temps. Use Procedure below.
• split — the two-process topology: a standalone temps proxy (Pingora data plane) plus a separate temps serve --role=console (Axum control plane). Use this to verify the proxy keeps serving while the console restarts. Trigger with "start temps split" / "/start-temps split". Use references/split-mode.md instead of the default Procedure below.

When to invoke

• "start temps" / "launch temps" / "bring up the server"
• "restart temps" / "kill and restart"
• "start temps split" / "test the proxy/console split" → references/split-mode.md
• After backend changes that need the server reloaded
• Anywhere you want a local control plane up for the checkout you're in

Procedure

0. Allocate this checkout's slot (ports, database name, data dir)

Run this from inside the checkout you are working in (the worktree, not necessarily your primary clone). It is idempotent — rerunning it returns the same slot. Run it verbatim; it prints the port map and writes ~/.temps-dev/slot-<N>.env, which every later step sources. The file is created with mode 0600, and every value is shell-escaped before writing so checkout paths and overrides cannot become commands when the file is sourced.

set -u
umask 077
mkdir -p "$HOME/.temps-dev"

# Which checkout is this working in?
REPO=$(git -C "$PWD" rev-parse --show-toplevel 2>/dev/null || pwd)
if [ -f "$REPO/Cargo.toml" ] && [ -d "$REPO/crates/temps-cli" ]; then TEMPS_ROOT="$REPO"
else echo "ERROR: no temps Rust workspace under $REPO — cd into a temps checkout first"; exit 1; fi

DB_CONTAINER="${TEMPS_DEV_DB_CONTAINER:-temps-db}"
DB_URL_BASE="${TEMPS_DEV_DB_URL_BASE:-postgres://temps:temps@localhost:5432}"

SLOT=""
TEMPS_ROOT_ID=$(printf '%s' "$TEMPS_ROOT" | shasum -a 256 | awk '{print $1}')
# 1. Reuse an existing claim for this checkout.
for f in "$HOME"/.temps-dev/slot-*.env; do
  [ -e "$f" ] || continue
  if grep -qxF "TEMPS_ROOT_ID=$TEMPS_ROOT_ID" "$f"; then
    SLOT=${f##*/slot-}; SLOT=${SLOT%.env}; break
  fi
done
# 2. Otherwise atomically claim the lowest slot (>= 0) that is unclaimed and
#    not listening. `mkdir` is the exclusion primitive: two concurrent agents
#    cannot both create the same claim directory.
#    Claims remain reserved until step 7 releases them. A stopped server or
#    temporarily unavailable checkout is not proof its migration DB is stale.
if [ -z "$SLOT" ]; then
  for i in $(seq 0 29); do
    f="$HOME/.temps-dev/slot-$i.env"
    claim="$HOME/.temps-dev/slot-$i.claim"
    { [ -e "$f" ] || [ -e "$claim" ]; } && continue
    busy=0
    for p in $((3000+i)) $((8080+i*10)) $((8081+i*10)) $((8443+i*10)); do
      lsof -nP -iTCP:$p -sTCP:LISTEN >/dev/null 2>&1 && busy=1
    done
    [ "$busy" -eq 1 ] && continue
    mkdir "$claim" 2>/dev/null || continue
    printf '%s\n' "$TEMPS_ROOT_ID" > "$claim/root-id"
    chmod 600 "$claim/root-id"
    SLOT=$i; CLAIM_DIR="$claim"; break
  done
fi
[ -z "$SLOT" ] && { echo "ERROR: no free slot in 0..29 — stop some servers first"; exit 1; }

if [ "$SLOT" = 0 ]; then
  DB_NAME=temps
else
  DB_NAME=temps_s$SLOT
fi
DATA_DIR="$TEMPS_ROOT/crates/temps-cli/temps_data"   # gitignored in every checkout

SLOT_FILE="$HOME/.temps-dev/slot-$SLOT.env"
{
  echo "# temps dev slot $SLOT — written by the start-temps skill. Delete to release."
  printf 'TEMPS_SLOT=%q\n' "$SLOT"
  printf 'TEMPS_ROOT_ID=%q\n' "$TEMPS_ROOT_ID"
  printf 'TEMPS_ROOT=%q\n' "$TEMPS_ROOT"
  printf 'TEMPS_HTTP_PORT=%q\n' "$((8080+SLOT*10))"
  printf 'TEMPS_CONSOLE_PORT=%q\n' "$((8081+SLOT*10))"
  printf 'TEMPS_TLS_PORT=%q\n' "$((8443+SLOT*10))"
  printf 'TEMPS_PARKED_PORT=%q\n' "$((8085+SLOT*10))"
  printf 'TEMPS_WEB_PORT=%q\n' "$((3000+SLOT))"
  printf 'TEMPS_DB_NAME=%q\n' "$DB_NAME"
  printf 'TEMPS_DB_CONTAINER=%q\n' "$DB_CONTAINER"
  printf 'TEMPS_DATABASE_URL=%q\n' "$DB_URL_BASE/$DB_NAME"
  printf 'TEMPS_DATA_DIR=%q\n' "$DATA_DIR"
  printf 'TEMPS_ADMIN_EMAIL=%q\n' 'dev@temps.sh'
  printf 'TEMPS_ADMIN_PASSWORD_FILE=%q\n' "$HOME/.temps-dev/slot-$SLOT.admin-password"
  printf 'TEMPS_SERVE_LOG=%q\n' "/tmp/temps-serve-s$SLOT.log"
  printf 'TEMPS_CONSOLE_LOG=%q\n' "/tmp/temps-console-s$SLOT.log"
  printf 'TEMPS_PROXY_LOG=%q\n' "/tmp/temps-proxy-s$SLOT.log"
  printf 'TEMPS_WEB_LOG=%q\n' "/tmp/temps-web-s$SLOT.log"
} > "$SLOT_FILE"
chmod 600 "$SLOT_FILE"
echo
echo "slot $SLOT -> api http://localhost:$((8080+SLOT*10))  web http://localhost:$((3000+SLOT))  db $DB_NAME"
echo "env file: $SLOT_FILE (mode 0600; contains the database URL — do not print it)"

Substitute the printed slot number for <N> in every block below, and report the two URLs at the end — in a non-zero slot they are not the familiar :3000 / :8080.

0b. Provision this slot's database and data dir

Each non-zero slot runs against its own database (temps_s<N>) and its own TEMPS_DATA_DIR, so a branch's migrations, encrypted rows, CAS blobs and sandboxes can't corrupt another branch's. Slot 0 uses the plain temps database from CONTRIBUTING.md.

Every slot starts from a fresh, empty database: the branch's own migrations build the schema on first serve, and the admin user is created non-interactively from TEMPS_ADMIN_EMAIL + TEMPS_ADMIN_PASSWORD_FILE (no prompt to feed via stdin).

source "$HOME/.temps-dev/slot-<N>.env"
PSQL="docker exec -i $TEMPS_DB_CONTAINER psql -U temps"

if $PSQL -tAc "SELECT 1 FROM pg_database WHERE datname='$TEMPS_DB_NAME'" | grep -q 1; then
  echo "database $TEMPS_DB_NAME already exists"
else
  $PSQL -c "CREATE DATABASE \"$TEMPS_DB_NAME\"" && \
    echo "created empty $TEMPS_DB_NAME — migrations run on first serve"
fi

mkdir -p "$TEMPS_DATA_DIR"
if [ ! -f "$TEMPS_ADMIN_PASSWORD_FILE" ]; then
  { openssl rand -base64 24 | tr -d '\n'; printf '!Aa1\n'; } > "$TEMPS_ADMIN_PASSWORD_FILE"
  chmod 600 "$TEMPS_ADMIN_PASSWORD_FILE"
fi
echo "login: $TEMPS_ADMIN_EMAIL / ***"
echo "password file: $TEMPS_ADMIN_PASSWORD_FILE (mode 0600; do not print its contents)"

Report the email and password-file path, but never the password — a fresh slot DB has no other account. (Password rules: ≥8 chars with upper, lower, digit and a special character — validate_password_complexity rejects anything weaker and serve will fail to start.)

Docker precheck

If Docker is down, some plugin/sandbox initialization can fail silently while the HTTP port still binds — the server looks up, but pieces that shell out to Docker won't work and the reason can be buried in the log. Check first:

docker info >/dev/null 2>&1 && echo "docker ok" || \
  echo "DOCKER DOWN — start it before testing anything that provisions containers"

1. Kill only this slot's processes

Ownership-checked: it refuses to kill anything whose cwd is outside this checkout. If it refuses, do not work around it with kill -9 — another session owns that process. Re-run step 0 after deleting this slot's env file to get a different slot instead.

source "$HOME/.temps-dev/slot-<N>.env"

for spec in "$TEMPS_HTTP_PORT backend" "$TEMPS_CONSOLE_PORT console" "$TEMPS_WEB_PORT web"; do
  set -- $spec; PORT=$1; LABEL=$2
  for PID in $(lsof -nP -iTCP:$PORT -sTCP:LISTEN -t 2>/dev/null); do
    CWD=$(lsof -a -p "$PID" -d cwd -Fn 2>/dev/null | sed -n 's/^n//p' | head -1)
    case "$CWD" in
      "$TEMPS_ROOT"|"$TEMPS_ROOT"/*) ;;
      *) echo "REFUSING to kill pid $PID on :$PORT ($LABEL) — cwd '$CWD' is outside $TEMPS_ROOT"; continue ;;
    esac
    kill "$PID" 2>/dev/null; sleep 2
    kill -0 "$PID" 2>/dev/null && { kill -9 "$PID"; sleep 1; }
  done
  lsof -nP -iTCP:$PORT -sTCP:LISTEN 2>/dev/null || echo "port $PORT free ($LABEL)"
done

Never use a bare pkill -f temps / pkill -f cargo — it takes down every other checkout's server too.

2. Launch the server

--profile fast gives release-grade runtime speed with much faster link times than --release (see Notes). TEMPS_ADMIN_EMAIL + TEMPS_ADMIN_PASSWORD_FILE make the first-run admin bootstrap non-interactive — without them a fresh database wedges a detached process in an infinite email/password re-prompt loop.

source "$HOME/.temps-dev/slot-<N>.env"

cd "$TEMPS_ROOT/crates/temps-cli" && \
  RUST_BACKTRACE=full \
  TEMPS_LOG_FORMAT=full \
  TEMPS_DATA_DIR="$TEMPS_DATA_DIR" \
  TEMPS_ADMIN_EMAIL="$TEMPS_ADMIN_EMAIL" \
  TEMPS_ADMIN_PASSWORD_FILE="$TEMPS_ADMIN_PASSWORD_FILE" \
  TEMPS_DISABLE_HTTPS_REDIRECT=true \
  TEMPS_TELEMETRY=0 \
  nohup cargo run --profile fast --bin temps --package temps-cli -- \
    serve \
    --disable-https-redirect \
    --database-url="$TEMPS_DATABASE_URL" \
    --address=127.0.0.1:$TEMPS_HTTP_PORT \
    --tls-address=127.0.0.1:$TEMPS_TLS_PORT \
    --console-address=127.0.0.1:$TEMPS_CONSOLE_PORT \
    --log-level=debug \
    > "$TEMPS_SERVE_LOG" 2>&1 & disown
echo "serve launched (slot $TEMPS_SLOT) -> $TEMPS_SERVE_LOG"

(If you're testing multi-node worker join locally, add --private-address=<your LAN IP> — workers use it to reach this control plane's services.)

Run this detached (nohup ... & disown, not a backgrounded foreground job) so the process survives past this command finishing.

3. Launch the web dev server

rsbuild.config.ts proxies /api to TEMPS_API_TARGET || http://localhost:8080 — so any non-zero slot must set TEMPS_API_TARGET, otherwise the SPA talks to whatever server owns :8080 instead of yours.

source "$HOME/.temps-dev/slot-<N>.env"

cd "$TEMPS_ROOT/web" && \
  TEMPS_API_TARGET="http://localhost:$TEMPS_HTTP_PORT" \
  nohup bun dev --port $TEMPS_WEB_PORT > "$TEMPS_WEB_LOG" 2>&1 & disown

Rsbuild typically reports ready built in <1s and the listener appears within a few seconds. Verify:

source "$HOME/.temps-dev/slot-<N>.env"
for i in $(seq 1 12); do
  sleep 1
  if lsof -nP -iTCP:$TEMPS_WEB_PORT -sTCP:LISTEN >/dev/null 2>&1; then
    echo "web ready after ${i}s on http://localhost:$TEMPS_WEB_PORT"
    break
  fi
done
lsof -nP -iTCP:$TEMPS_WEB_PORT -sTCP:LISTEN >/dev/null 2>&1 || tail -30 "$TEMPS_WEB_LOG"

If the web port doesn't come up, tail -30 "$TEMPS_WEB_LOG" — usually a missing node_modules (run bun install in <checkout>/web first) or a port collision.

4. Wait for the backend listener

Poll the slot's ports (build can take 30s–5min depending on cache state). Don't sleep in a single long block — short polls so readiness can be reported promptly.

Check the console port, not just the HTTP port. In --role=all the proxy binds $TEMPS_HTTP_PORT even when console startup fails, so an HTTP listener alone is not proof the server works — you can get a proxy that 503s every request with no console behind it.

source "$HOME/.temps-dev/slot-<N>.env"
for i in $(seq 1 30); do
  sleep 10
  if lsof -nP -iTCP:$TEMPS_CONSOLE_PORT -sTCP:LISTEN >/dev/null 2>&1; then
    echo "ready after $((i*10))s — api http://localhost:$TEMPS_HTTP_PORT console :$TEMPS_CONSOLE_PORT"
    curl -s -o /dev/null -w "console /readyz -> %{http_code}\n" http://localhost:$TEMPS_CONSOLE_PORT/readyz
    exit 0
  fi
done
echo "console never bound :$TEMPS_CONSOLE_PORT after 5min"
sed 's/\x1b\[[0-9;]*m//g' "$TEMPS_SERVE_LOG" | grep -iE "FAILED|failed to start|Plugin registration failed" | head -5

A fresh slot DB should also log Initial admin created from TEMPS_ADMIN_EMAIL and password secret file — if instead you see the "Welcome to Temps!" banner, the env vars didn't reach the process and it is now wedged on a prompt.

5. Report the URLs

Always finish by reporting the actual URLs for this slot — they differ per worktree — plus the login, which for a fresh slot DB is a brand-new account that exists nowhere else:

slot <N>: web http://localhost:<3000+N>   api http://localhost:<8080+N*10>
          db temps_s<N>   login dev@temps.sh / ***
          password file ~/.temps-dev/slot-<N>.admin-password

6. After-restart housekeeping (optional)

If you changed backend types/handlers, regenerate the web SDK:

source "$HOME/.temps-dev/slot-<N>.env"
cd "$TEMPS_ROOT/web" && bun run openapi-ts

Regenerate after every backend restart that changes the OpenAPI surface.

7. Releasing a slot

When a worktree is deleted, or you want to free ports/disk. Confirm before running — this destroys that slot's data. Slot 0 uses the shared temps database from CONTRIBUTING.md, so releasing slot 0 only clears its data dir, not the database.

source "$HOME/.temps-dev/slot-<N>.env"
EXPECTED_ROOT=$(git -C "$TEMPS_ROOT" rev-parse --show-toplevel 2>/dev/null) || {
  echo "REFUSING cleanup: TEMPS_ROOT is not a Git checkout"; exit 1;
}
EXPECTED_DATA_DIR="$EXPECTED_ROOT/crates/temps-cli/temps_data"
EXPECTED_PASSWORD_FILE="$HOME/.temps-dev/slot-$TEMPS_SLOT.admin-password"
EXPECTED_CLAIM_DIR="$HOME/.temps-dev/slot-$TEMPS_SLOT.claim"
[ "$TEMPS_ROOT" = "$EXPECTED_ROOT" ] && [ -f "$TEMPS_ROOT/Cargo.toml" ] && \
  [ -d "$TEMPS_ROOT/crates/temps-cli" ] || {
  echo "REFUSING cleanup: invalid Temps workspace root"; exit 1;
}
[ "$TEMPS_DATA_DIR" = "$EXPECTED_DATA_DIR" ] || {
  echo "REFUSING cleanup: data dir is outside the expected checkout path"; exit 1;
}
[ "$TEMPS_ADMIN_PASSWORD_FILE" = "$EXPECTED_PASSWORD_FILE" ] || {
  echo "REFUSING cleanup: password file is outside the expected slot path"; exit 1;
}
[ -f "$EXPECTED_CLAIM_DIR/root-id" ] && \
  grep -qxF "$TEMPS_ROOT_ID" "$EXPECTED_CLAIM_DIR/root-id" || {
  echo "REFUSING cleanup: slot claim is missing or belongs to another checkout"; exit 1;
}
case "$TEMPS_SLOT" in
  0) EXPECTED_DB_NAME=temps ;;
  [1-9]|[1-2][0-9]) EXPECTED_DB_NAME="temps_s$TEMPS_SLOT" ;;
  *) echo "REFUSING cleanup: slot must be an integer in 0..29"; exit 1 ;;
esac
[ "$TEMPS_DB_NAME" = "$EXPECTED_DB_NAME" ] || {
  echo "REFUSING cleanup: database does not match the validated slot"; exit 1;
}
if [ "$TEMPS_SLOT" != 0 ]; then
  docker exec -i "$TEMPS_DB_CONTAINER" psql -U temps -c "DROP DATABASE IF EXISTS \"$TEMPS_DB_NAME\" WITH (FORCE)"
fi
rm -rf -- "$TEMPS_DATA_DIR"
rm -f "$TEMPS_ADMIN_PASSWORD_FILE" "$HOME/.temps-dev/slot-$TEMPS_SLOT.env"
rm -f "$EXPECTED_CLAIM_DIR/root-id"
rmdir "$EXPECTED_CLAIM_DIR"
echo "slot $TEMPS_SLOT released"

Claims are not automatically reclaimed: a stopped server or temporarily unavailable checkout is not proof that its migration database is abandoned. Run step 7 before deleting a worktree. If one is already gone, inspect its mode-0600 claim file, confirm the exact checkout/slot/database with the user, and clean it up manually. List candidate databases with:

docker exec -i "${TEMPS_DEV_DB_CONTAINER:-temps-db}" psql -U temps -c \
  "SELECT datname, pg_size_pretty(pg_database_size(datname)) FROM pg_database WHERE datname LIKE 'temps_s%' ORDER BY 1"

Split-mode procedure (/start-temps split)

Testing the ADR-017 two-process proxy/console topology instead of the default monolith is a separate, less-common workflow — see references/split-mode.md for the full procedure (build, launch console + proxy, wait for both listeners, verify independence). It reuses this file's step 0 (slot allocation) and step 1 (ownership-checked kill) first.

Notes

• Profile: fast is defined in the workspace root Cargo.toml. Inherits release; codegen-units = 16, debug = false, strip = "symbols", lto = false, incremental = true. ~30–60s incremental rebuild after small changes.
• Why not --release: full release with codegen-units = 1 and default symbols takes ~5–10min for a clean build. fast is the everyday default.
• Why not debug: the debug build is meant for attaching a debugger. Without one attached, runtime is meaningfully slower for no benefit.
• Isolation boundaries. A slot owns its ports, its database (temps_s<N>), and its TEMPS_DATA_DIR (encryption key, CAS blobs, sandboxes, stacks, plugin data). Branches with different migration sets don't fight over one schema. What is still shared: the Postgres instance (disk, connections, shared_buffers), the Docker daemon, and any container names/host ports the branch's own deployments allocate.
• Fresh-DB first run: with TEMPS_ADMIN_EMAIL + TEMPS_ADMIN_PASSWORD_FILE set (step 0b writes both), bootstrap is non-interactive. Without them serve prompts for the admin email, prints a generated password, and asks "Have you saved the password?" — a detached process then wedges in an infinite re-prompt loop and floods the log. If you ever do need the interactive path, feed it stdin: printf 'you@example.com\ny\n' | temps serve ....
• Log files: per slot — /tmp/temps-serve-s<N>.log, /tmp/temps-web-s<N>.log, /tmp/temps-console-s<N>.log, /tmp/temps-proxy-s<N>.log. Tail with tail -f "$TEMPS_SERVE_LOG" after sourcing the slot env.
• Web port: the backend does not serve the SPA in dev — the rsbuild dev server does, and it proxies /api to TEMPS_API_TARGET.
• Override: if you want the original debug-symbol build (to attach lldb later), swap --profile fast for plain cargo run (no --profile).