Formisch

This skill helps AI agents work effectively with Formisch, the schema-based, headless form library for modern frameworks.

When to Use This Skill

• When the user asks about form handling with Formisch
• When managing form state and validation
• When working with Angular, Preact, Qwik, React, React Native, Solid, Svelte, or Vue forms
• When integrating Valibot schemas with forms

Introduction

Formisch is a schema-based, headless form library that works across multiple frameworks. Key highlights:

• Small bundle size — Starting at ~2.5 kB
• Schema-based validation — Uses Valibot for type-safe validation
• Headless design — You control the UI completely
• Type safety — Full TypeScript support with autocompletion
• Framework-native — Native performance for each supported framework

Supported Frameworks

Installation

1. Install Valibot (peer dependency)

npm install valibot

2. Install Formisch for your framework

npm install @formisch/react         # React
npm install @formisch/angular       # Angular
npm install @formisch/vue           # Vue
npm install @formisch/solid         # SolidJS
npm install @formisch/preact        # Preact
npm install @formisch/svelte        # Svelte
npm install @formisch/qwik          # Qwik
npm install @formisch/react-native  # React Native

Core Concepts

Schema-First Design

Every form starts with a Valibot schema. Types are automatically inferred from the schema.

import * as v from "valibot";

const LoginSchema = v.object({
  email: v.pipe(
    v.string("Please enter your email."),
    v.nonEmpty("Please enter your email."),
    v.email("The email address is badly formatted."),
  ),
  password: v.pipe(
    v.string("Please enter your password."),
    v.nonEmpty("Please enter your password."),
    v.minLength(8, "Your password must have 8 characters or more."),
  ),
});

Form Store

The form store manages all form state. Access it via the framework-specific hook/primitive.

Form Store Properties:

• isSubmitting — Form is currently being submitted
• isSubmitted — Form submission has been attempted
• isValidating — Validation is in progress
• isTouched — At least one field has been touched
• isEdited — At least one field has been edited
• isDirty — At least one field differs from initial value
• isValid — All fields pass validation
• errors — Root-level validation errors

Field Store

Each field has its own reactive store with:

• path — Path array to the field
• input — Current field value
• errors — Field-specific errors
• isTouched — Field has been focused
• isEdited — Field value has been edited
• isDirty — Field value differs from initial value
• isValid — Field passes validation
• props — Props to spread onto native elements (Angular connects controls with [formischControl] instead)
• onChange (React and React Native) / onInput (Solid, Svelte, Preact, and Qwik) / setInput (Angular) — Sets the field input value programmatically. Use this when the field cannot be connected to a native element. In Vue, set field.input directly (for example with v-model).

Store reactivity is framework-specific. React, React Native, Solid, Svelte, and Vue expose plain reactive properties. Angular properties are signals and are called like field.errors(), except path, which is a plain value. Preact and Qwik properties are signals; use .value in conditions and ordinary TypeScript logic. Do not copy one framework's access syntax into another.

Dirty Tracking

Formisch tracks two inputs per field:

• Initial input — Baseline for dirty tracking (server state)
• Current input — What the user is editing (client state)

isDirty becomes true when current input differs from initial input.

Framework Examples

Angular Example

Angular uses signals, dependency injection, and directives instead of a JSX component API.

import { Component } from "@angular/core";
import {
  FormischControl,
  FormischField,
  FormischForm,
  injectForm,
  type SubmitHandler,
} from "@formisch/angular";
import * as v from "valibot";

const LoginSchema = v.object({
  email: v.pipe(v.string(), v.email()),
  password: v.pipe(v.string(), v.minLength(8)),
});

@Component({
  selector: "app-login",
  imports: [FormischForm, FormischField, FormischControl],
  template: `
    <form [formischForm]="loginForm" [formischSubmit]="handleSubmit">
      <ng-container *formischField="['email'] of loginForm; let field">
        <input [formischControl]="field" type="email" />
        @if (field.errors(); as errors) {
          <div>{{ errors[0] }}</div>
        }
      </ng-container>
      <button type="submit" [disabled]="loginForm.isSubmitting()">Login</button>
    </form>
  `,
})
export class LoginComponent {
  readonly loginForm = injectForm({ schema: LoginSchema });

  readonly handleSubmit: SubmitHandler<typeof LoginSchema> = (output) => {
    console.log(output);
  };
}

Let [formischControl] synchronize the native control. Do not add competing [value] or [checked] bindings except when value identifies an option in a radio or checkbox group.

React Native Example

React Native has no DOM <form> element or Formisch Form component. Use handleSubmit and bind field.props to TextInput.

import { Field, handleSubmit, useForm } from "@formisch/react-native";
import { Button, TextInput, View } from "react-native";
import * as v from "valibot";

const LoginSchema = v.object({
  email: v.pipe(v.string(), v.email()),
  password: v.pipe(v.string(), v.minLength(8)),
});

export default function LoginScreen() {
  const loginForm = useForm({ schema: LoginSchema });
  const submitForm = handleSubmit(loginForm, (output) => console.log(output));

  return (
    <View>
      <Field of={loginForm} path={["email"]}>
        {(field) => (
          <TextInput
            {...field.props}
            value={field.input}
            autoCapitalize="none"
            keyboardType="email-address"
          />
        )}
      </Field>
      <Field of={loginForm} path={["password"]}>
        {(field) => (
          <TextInput {...field.props} value={field.input} secureTextEntry />
        )}
      </Field>
      <Button title="Login" onPress={submitForm} />
    </View>
  );
}

React Native text inputs are controlled, so always pass value={field.input}. Use field.onChange(value) for switches, sliders, pickers, and non-string values.

React Example

import { Field, Form, useForm } from "@formisch/react";
import type { SubmitHandler } from "@formisch/react";
import * as v from "valibot";

const LoginSchema = v.object({
  email: v.pipe(v.string(), v.email()),
  password: v.pipe(v.string(), v.minLength(8)),
});

export default function LoginPage() {
  const loginForm = useForm({
    schema: LoginSchema,
  });

  const handleSubmit: SubmitHandler<typeof LoginSchema> = (output) => {
    console.log(output); // { email: string, password: string }
  };

  return (
    <Form of={loginForm} onSubmit={handleSubmit}>
      <Field of={loginForm} path={["email"]}>
        {(field) => (
          <div>
            <input {...field.props} value={field.input} type="email" />
            {field.errors && <div>{field.errors[0]}</div>}
          </div>
        )}
      </Field>
      <Field of={loginForm} path={["password"]}>
        {(field) => (
          <div>
            <input {...field.props} value={field.input} type="password" />
            {field.errors && <div>{field.errors[0]}</div>}
          </div>
        )}
      </Field>
      <button type="submit" disabled={loginForm.isSubmitting}>
        {loginForm.isSubmitting ? "Submitting..." : "Login"}
      </button>
    </Form>
  );
}

Vue Example

<script setup lang="ts">
import { Field, Form, useForm } from "@formisch/vue";
import type { SubmitHandler } from "@formisch/vue";
import * as v from "valibot";

const LoginSchema = v.object({
  email: v.pipe(v.string(), v.email()),
  password: v.pipe(v.string(), v.minLength(8)),
});

const loginForm = useForm({
  schema: LoginSchema,
});

const handleSubmit: SubmitHandler<typeof LoginSchema> = (output) => {
  console.log(output);
};
</script>

<template>
  <Form :of="loginForm" @submit="handleSubmit">
    <Field :of="loginForm" :path="['email']" v-slot="field">
      <div>
        <input v-model="field.input" v-bind="field.props" type="email" />
        <div v-if="field.errors">{{ field.errors[0] }}</div>
      </div>
    </Field>
    <Field :of="loginForm" :path="['password']" v-slot="field">
      <div>
        <input v-model="field.input" v-bind="field.props" type="password" />
        <div v-if="field.errors">{{ field.errors[0] }}</div>
      </div>
    </Field>
    <button type="submit">Login</button>
  </Form>
</template>

SolidJS Example

import { Field, Form, createForm } from "@formisch/solid";
import type { SubmitHandler } from "@formisch/solid";
import * as v from "valibot";

const LoginSchema = v.object({
  email: v.pipe(v.string(), v.email()),
  password: v.pipe(v.string(), v.minLength(8)),
});

export default function LoginPage() {
  const loginForm = createForm({
    schema: LoginSchema,
  });

  const handleSubmit: SubmitHandler<typeof LoginSchema> = (output) => {
    console.log(output);
  };

  return (
    <Form of={loginForm} onSubmit={handleSubmit}>
      <Field of={loginForm} path={["email"]}>
        {(field) => (
          <div>
            <input {...field.props} value={field.input} type="email" />
            {field.errors && <div>{field.errors[0]}</div>}
          </div>
        )}
      </Field>
      <Field of={loginForm} path={["password"]}>
        {(field) => (
          <div>
            <input {...field.props} value={field.input} type="password" />
            {field.errors && <div>{field.errors[0]}</div>}
          </div>
        )}
      </Field>
      <button type="submit">Login</button>
    </Form>
  );
}

Svelte Example

<script lang="ts">
  import { createForm, Field, Form } from '@formisch/svelte';
  import type { SubmitHandler } from '@formisch/svelte';
  import * as v from 'valibot';

  const LoginSchema = v.object({
    email: v.pipe(v.string(), v.email()),
    password: v.pipe(v.string(), v.minLength(8)),
  });

  const loginForm = createForm({
    schema: LoginSchema,
  });

  const handleSubmit: SubmitHandler<typeof LoginSchema> = (output) => {
    console.log(output);
  };
</script>

<Form of={loginForm} onsubmit={handleSubmit}>
  <Field of={loginForm} path={['email']}>
    {#snippet children(field)}
      <div>
        <input {...field.props} value={field.input} type="email" />
        {#if field.errors}
          <div>{field.errors[0]}</div>
        {/if}
      </div>
    {/snippet}
  </Field>
  <Field of={loginForm} path={['password']}>
    {#snippet children(field)}
      <div>
        <input {...field.props} value={field.input} type="password" />
        {#if field.errors}
          <div>{field.errors[0]}</div>
        {/if}
      </div>
    {/snippet}
  </Field>
  <button type="submit">Login</button>
</Form>

Qwik Example

import { Field, Form, useForm$ } from "@formisch/qwik";
import { component$ } from "@qwik.dev/core";
import * as v from "valibot";

const LoginSchema = v.object({
  email: v.pipe(v.string(), v.email()),
  password: v.pipe(v.string(), v.minLength(8)),
});

export default component$(() => {
  const loginForm = useForm$(() => ({
    schema: LoginSchema,
  }));

  return (
    <Form of={loginForm} onSubmit$={(output) => console.log(output)}>
      <Field
        of={loginForm}
        path={["email"]}
        render$={(field) => (
          <div>
            <input {...field.props} value={field.input.value} type="email" />
            {field.errors.value && <div>{field.errors.value[0]}</div>}
          </div>
        )}
      />
      <Field
        of={loginForm}
        path={["password"]}
        render$={(field) => (
          <div>
            <input {...field.props} value={field.input.value} type="password" />
            {field.errors.value && <div>{field.errors.value[0]}</div>}
          </div>
        )}
      />
      <button type="submit">Login</button>
    </Form>
  );
});

Form Configuration

const form = useForm({
  // Required: Valibot schema
  schema: MySchema,

  // Optional: Initial values (partial allowed)
  initialInput: {
    email: "user@example.com",
  },

  // Optional: Empty values for required fields without initial input
  // Required strings default to ''; number, boolean, and date to undefined
  emptyInput: {
    number: 0,
  },

  // Optional: When first validation occurs
  // Options: 'initial' | 'touch' | 'input' | 'change' | 'blur' | 'submit' (default)
  validate: "submit",

  // Optional: When a field is validated again once it already has an
  // error or the form has been submitted
  // Options: 'touch' | 'input' (default) | 'change' | 'blur' | 'submit'
  revalidate: "input",
});

In Qwik, useForm$ must receive a function that returns the config, e.g. useForm$(() => ({ schema: MySchema })). This allows Qwik to convert the config into a QRL.

Optional and nullable fields remain undefined. emptyInput only supplies fallbacks for required fields whose input is undefined.

Field Paths

Paths are type-safe arrays that reference fields in your schema.

// Top-level field
<Field of={form} path={['email']} />

// Nested field (schema: { user: { email: string } })
<Field of={form} path={['user', 'email']} />

// Array item field (schema: { todos: [{ label: string }] })
<Field of={form} path={['todos', 0, 'label']} />

// Dynamic array index
{items.map((item, index) => (
  <Field of={form} path={['todos', index, 'label']} key={item} />
))}

Form Methods

All methods follow a consistent API pattern:

• First parameter: Form store
• Second parameter: Config object

Reading Values

import {
  getDeepError,
  getDeepErrorEntries,
  getDeepErrorEntry,
  getDeepErrors,
  getErrors,
  getInput,
} from "@formisch/react";

// Get field value
const email = getInput(form, { path: ["email"] });

// Get entire form input
const allInputs = getInput(form);

// Get field errors
const emailErrors = getErrors(form, { path: ["email"] });

// Get all errors across all fields (including form-level errors)
const allErrors = getDeepErrors(form);

// Get all errors of a field and its descendants
const todoErrors = getDeepErrors(form, { path: ["todos"] });

// Get every error together with its field path
const errorEntries = getDeepErrorEntries(form);

// Get only the first error of a field and its descendants
const firstTodoError = getDeepError(form, { path: ["todos"] });

// Get only the first error together with its field path
const firstErrorEntry = getDeepErrorEntry(form);

Form-level form.errors and getErrors(form) contain only root-level errors. Use the deep-error methods when descendant field errors are needed. The singular variants getDeepError and getDeepErrorEntry stop at the first field with errors, which is useful for showing a single message for a nested structure.

Reading Dirty State

import {
  getDirtyInput,
  getDirtyPaths,
  isDirty,
  pickDirty,
} from "@formisch/react";

// Raw dirty form input, or undefined when nothing is dirty
const dirtyInput = getDirtyInput(form);

// Paths of dirty fields (arrays are treated as atomic values)
const dirtyPaths = getDirtyPaths(form);

// Cheap boolean check when the dirty values are not needed
const hasChanges = isDirty(form);

// Boolean check scoped to a field and its descendants
const emailChanged = isDirty(form, { path: ["email"] });

// In a submit handler, keep transformed output only where fields are dirty
const dirtyOutput = pickDirty(form, { from: output });

getDirtyInput returns raw form input. pickDirty applies the form's dirty mask to a supplied value, which is useful for validated and transformed submit output.

The sibling methods isTouched, isEdited, and isValid follow the same pattern as isDirty. Each checks the entire form when called without a config, or a specific field and its descendants when called with a path.

Setting Values

import { setInput, setErrors, reset } from "@formisch/react";

// Set field value (updates current input, not initial)
setInput(form, { path: ["email"], input: "new@example.com" });

// Set field errors manually
setErrors(form, { path: ["email"], errors: ["Email already taken"] });

// Clear errors
setErrors(form, { path: ["email"], errors: null });

// Reset entire form
reset(form);

// Reset a single field
reset(form, { path: ["email"] });

// Reset with new initial values
reset(form, {
  initialInput: { email: "", password: "" },
});

// Reset but keep current input
reset(form, {
  initialInput: newServerData,
  keepInput: true,
});

reset also accepts the flags keepTouched, keepEdited, and keepErrors. The form-level reset additionally accepts keepSubmitted. All flags default to false.

Form Control

import { validate, focus, submit, handleSubmit } from "@formisch/react";

// Validate form manually (returns a Promise of a Valibot SafeParseResult)
const result = await validate(form);
if (result.success) {
  console.log(result.output);
} else {
  console.log(result.issues);
}

// Validate and focus first error field
await validate(form, { shouldFocus: true });

// Focus a specific field
focus(form, { path: ["email"] });

// Programmatically submit form
submit(form);

// Create submit handler for external buttons
const onExternalSubmit = handleSubmit(form, (output) => {
  console.log(output);
});

submit requires a registered DOM form and is not exported by @formisch/react-native. In React Native and in layouts without a <form> element, call the function returned by handleSubmit instead.

Field Arrays

For dynamic lists of fields, use FieldArray with array manipulation methods.

The field array store exposes path, items (stable item IDs for use as keys), errors, isTouched, isEdited, isDirty, and isValid.

Schema

const TodoSchema = v.object({
  heading: v.pipe(v.string(), v.nonEmpty()),
  todos: v.pipe(
    v.array(
      v.object({
        label: v.pipe(v.string(), v.nonEmpty()),
        deadline: v.pipe(v.string(), v.nonEmpty()),
      }),
    ),
    v.nonEmpty(),
    v.maxLength(10),
  ),
});

React Example

import {
  Field,
  FieldArray,
  Form,
  useForm,
  insert,
  remove,
  move,
  swap,
} from "@formisch/react";

export default function TodoPage() {
  const todoForm = useForm({
    schema: TodoSchema,
    initialInput: {
      heading: "",
      todos: [{ label: "", deadline: "" }],
    },
  });

  return (
    <Form of={todoForm} onSubmit={(output) => console.log(output)}>
      <Field of={todoForm} path={["heading"]}>
        {(field) => <input {...field.props} value={field.input} type="text" />}
      </Field>

      <FieldArray of={todoForm} path={["todos"]}>
        {(fieldArray) => (
          <div>
            {fieldArray.items.map((item, index) => (
              <div key={item}>
                <Field of={todoForm} path={["todos", index, "label"]}>
                  {(field) => (
                    <input {...field.props} value={field.input} type="text" />
                  )}
                </Field>
                <Field of={todoForm} path={["todos", index, "deadline"]}>
                  {(field) => (
                    <input {...field.props} value={field.input} type="date" />
                  )}
                </Field>
                <button
                  type="button"
                  onClick={() =>
                    remove(todoForm, { path: ["todos"], at: index })
                  }
                >
                  Delete
                </button>
              </div>
            ))}
            {fieldArray.errors && <div>{fieldArray.errors[0]}</div>}
          </div>
        )}
      </FieldArray>

      <button
        type="button"
        onClick={() =>
          insert(todoForm, {
            path: ["todos"],
            initialInput: { label: "", deadline: "" },
          })
        }
      >
        Add Todo
      </button>

      <button type="submit">Submit</button>
    </Form>
  );
}

Array Methods

import { insert, remove, move, swap, replace } from "@formisch/react";

// Add item at end
insert(form, { path: ["todos"], initialInput: { label: "", deadline: "" } });

// Add item at specific index
insert(form, {
  path: ["todos"],
  at: 0,
  initialInput: { label: "", deadline: "" },
});

// Remove item at index
remove(form, { path: ["todos"], at: index });

// Move item from one index to another
move(form, { path: ["todos"], from: 0, to: 3 });

// Swap two items
swap(form, { path: ["todos"], at: 0, and: 1 });

// Replace item at index
replace(form, {
  path: ["todos"],
  at: 0,
  initialInput: { label: "New task", deadline: "2024-12-31" },
});

TypeScript Integration

Type Inference

Types are automatically inferred from your Valibot schema:

const LoginSchema = v.object({
  email: v.pipe(v.string(), v.email()),
  password: v.pipe(v.string(), v.minLength(8)),
});

const form = useForm({ schema: LoginSchema });
// form is FormStore<typeof LoginSchema>

// Submit handler receives typed output
const handleSubmit: SubmitHandler<typeof LoginSchema> = (output) => {
  output.email; // ✓ string
  output.password; // ✓ string
  output.username; // ✗ TypeScript error
};

Input vs Output Types

Schemas with transformations have different input and output types:

const ProfileSchema = v.object({
  age: v.pipe(
    v.string(), // Input: string
    v.transform((input) => Number(input)), // Output: number
    v.number(),
  ),
  birthDate: v.pipe(
    v.string(), // Input: string
    v.transform((input) => new Date(input)), // Output: Date
    v.date(),
  ),
});

// In Field: field.input is string
// In onSubmit: output.age is number, output.birthDate is Date

Type-Safe Props

Pass forms to child components with proper typing:

import { Form, type FormStore, useForm } from "@formisch/react";

export default function LoginPage() {
  const loginForm = useForm({ schema: LoginSchema });
  return <FormContent of={loginForm} />;
}

type FormContentProps = {
  of: FormStore<typeof LoginSchema>;
};

function FormContent({ of }: FormContentProps) {
  return (
    <Form of={of} onSubmit={(output) => console.log(output)}>
      {/* ... */}
    </Form>
  );
}

Generic Field Components

Create reusable field components with proper typing:

import { useField, type FormStore } from "@formisch/react";
import * as v from "valibot";

type EmailInputProps = {
  of: FormStore<v.GenericSchema<{ email: string }>>;
};

function EmailInput({ of }: EmailInputProps) {
  const field = useField(of, { path: ["email"] });

  return (
    <div>
      <input {...field.props} value={field.input} type="email" />
      {field.errors && <div>{field.errors[0]}</div>}
    </div>
  );
}

The v.GenericSchema<{ email: string }> constraint accepts any form whose schema contains an email field of type string. TypeScript catches mismatches at compile time.

Available Types

import type {
  FormStore, // Form store type
  FieldStore, // Field store type
  FieldArrayStore, // Field array store type
  SubmitHandler, // Submit handler function type
  ValidPath, // Valid field path type
  ValidArrayPath, // Valid array field path type
  Schema, // Base schema type from Valibot
} from "@formisch/react";

Validation Timing

validate Option

Controls when the first validation occurs:

revalidate Option

Controls when a field is validated again, once it already has an error or the form has been submitted:

Special Inputs

Select (Single)

<Field of={form} path={["framework"]}>
  {(field) => (
    <select {...field.props} value={field.input ?? ""}>
      {options.map(({ label, value }) => (
        <option key={value} value={value}>
          {label}
        </option>
      ))}
    </select>
  )}
</Field>

Select (Multiple)

<Field of={form} path={["frameworks"]}>
  {(field) => (
    <select {...field.props} value={field.input ?? []} multiple>
      {options.map(({ label, value }) => (
        <option key={value} value={value}>
          {label}
        </option>
      ))}
    </select>
  )}
</Field>

Checkbox

<Field of={form} path={["acceptTerms"]}>
  {(field) => <input {...field.props} type="checkbox" checked={field.input} />}
</Field>

File Input

File inputs cannot be controlled. Handle via UI around them:

<Field of={form} path={["avatar"]}>
  {(field) => (
    <div>
      <input {...field.props} type="file" />
      {field.input && <span>{field.input.name}</span>}
    </div>
  )}
</Field>

useField Hook

For complex field components, use the useField hook instead of the Field component:

import { useField } from "@formisch/react";
import { useEffect } from "react";

function EmailInput({ form }) {
  const field = useField(form, { path: ["email"] });

  // Access field state in component logic
  useEffect(() => {
    if (field.errors) {
      console.log("Email has errors:", field.errors);
    }
  }, [field.errors]);

  return (
    <div>
      <input {...field.props} value={field.input} type="email" />
      {field.errors && <div>{field.errors[0]}</div>}
    </div>
  );
}

When to use which:

• Field component — Multiple fields in the same component
• useField hook — Single field with component logic access

The useFieldArray hook is the equivalent counterpart of the FieldArray component. In Angular, use the injectField and injectFieldArray functions or the *formischField and *formischFieldArray directives.

Using Component Libraries

When using component libraries that don't expose their underlying native elements, you cannot spread field.props directly. Instead, update the value programmatically with field.onChange (React and React Native), field.onInput (Solid, Svelte, Preact, and Qwik), field.setInput (Angular), or by assigning to field.input (Vue):

import { DatePicker } from "some-component-library";

<Field of={form} path={["date"]}>
  {(field) => (
    <DatePicker
      value={field.input}
      onChange={(newDate) => field.onChange(newDate)}
    />
  )}
</Field>;

These setters update the field value and trigger validation, just like a native input would.

This is useful for:

• Component libraries that wrap native elements without exposing them
• Complex custom inputs like date pickers, rich text editors, or color pickers

Async Submission

import { setErrors, useForm } from "@formisch/react";
import type { SubmitHandler } from "@formisch/react";

const loginForm = useForm({ schema: LoginSchema });

const handleSubmit: SubmitHandler<typeof LoginSchema> = async (output) => {
  try {
    const response = await fetch("/api/login", {
      method: "POST",
      headers: { "Content-Type": "application/json" },
      body: JSON.stringify(output),
    });

    if (!response.ok) {
      // Set server-side errors
      const data = await response.json();
      setErrors(loginForm, { path: ["email"], errors: [data.error] });
    }
  } catch (error) {
    console.error("Submission failed:", error);
  }
};

The form's isSubmitting state stays true until the async handler resolves. If the handler throws, Formisch catches the error and sets its message as a root-level form error on form.errors.

Common Patterns

Loading State

<button type="submit" disabled={form.isSubmitting}>
  {form.isSubmitting ? "Submitting..." : "Submit"}
</button>

Submit on Enter

Formisch handles this automatically via the native <form> element.

Reset After Success

const handleSubmit: SubmitHandler<typeof Schema> = async (output) => {
  await saveData(output);

  // Full reset to initial state
  reset(form);

  // Or reset but keep current input values
  reset(form, { keepInput: true });
};

Server Data Sync

When server data changes, update the baseline without losing user edits:

// After refetching data from server
reset(form, {
  initialInput: newServerData,
  keepInput: true, // Keep user's current edits
  keepTouched: true, // Keep touched state (optional)
});

Conditional Fields

<Form of={form} onSubmit={handleSubmit}>
  <Field of={form} path={["hasAccount"]}>
    {(field) => (
      <input {...field.props} type="checkbox" checked={field.input} />
    )}
  </Field>
  {getInput(form, { path: ["hasAccount"] }) && (
    <Field of={form} path={["accountId"]}>
      {(field) => <input {...field.props} value={field.input} />}
    </Field>
  )}
</Form>

In React, calling getInput during render is reactive because useForm and useField enable signal tracking in the component that calls them. In the other frameworks, the read is tracked by their own reactive scopes.

Additional Resources

• Formisch Documentation
• Formisch Coding Agents Guide
• Formisch MCP server: https://formisch.dev/mcp (search_docs, get_doc, and list_docs)
• Append .md to any documentation URL for agent-friendly Markdown, or use https://formisch.dev/llms-{framework}.txt for a framework-specific index
• Formisch GitHub
• Valibot Documentation